Before the tool starts, get the setup right. Guards, a secure workpiece, suitable dust control and safe working methods come first. Personal protective equipment helps address the risks that remain.
Protect eyes and hearing
Select safety glasses or goggles rated for the particles or splashes involved. Where a face shield is required, use it with the appropriate eye protection underneath. Choose hearing protection for the noise exposure and make sure it fits correctly alongside other equipment.
Take dust seriously
Wood, masonry and other materials can create different airborne hazards. Control dust at source with an appropriate extraction or other approved control system. A general-purpose household vacuum or a loose face covering is not a substitute for a suitable dust-control system.
If respiratory protection is needed, the respirator and filter must suit the hazard, task and wearer. Tight-fitting respirators need proper fit testing and an effective facial seal. Ask a competent safety adviser to specify the protection for the actual work, especially for silica dust or fumes.
Match boots, helmets and visibility gear to the site
Check the protection markings and fit of safety footwear rather than relying on appearance. Rain boots are not automatically impact-resistant or electrically protective. Select helmets for the identified head hazards and high-visibility clothing where the worksite requires it. Inspect each item and replace it according to its manufacturer’s guidance.
Gloves need a task check
Suitable gloves can help when handling rough or sharp materials. They can also be caught by exposed rotating machinery. Never wear gloves at a drill press or other machinery where they could be pulled into moving parts. Follow the tool’s instructions and the task-specific risk assessment; gloves are not a universal rule for every tool.
Before you press the trigger
- Read the manual and check the tool, guard and accessory for damage.
- Secure the workpiece and keep other people clear.
- Keep loose clothing, jewellery and long hair away from moving parts.
- Disconnect the power source before changing accessories or performing maintenance.
Looking for hardware tools Maldives and the protective equipment to use with them? Send VOLKKEN your tool and task details so we can check available equipment against your requirements.
Further reading: HSE guidance on choosing PPE, HSE respiratory protection guidance and CCOHS drill press safety.